Image
Product code
Description
Manufacturer
Manufacturer code
Stock
Price
QTY
Thermostat TR-6, DIN rail
Application: The Electronic Temperature Regulator TR-6 is designed to keep the assigned temperature level in the range of (0 °C) – (+80 °C) in heating chambers, etc. Technical data: Relay regulator with one input and one relay output. Sensor type LM335. Range of regulation: (0 °C) – (+80 °C). Nominal capacity of electrical consumer, keeping the temperature in the chamber – 3600W. Precision class of +/-1 0C. Equipped with two sectional display. Warranty period of 24
236.97 KB
INTIEL
TR-6
3
pc
| 1+ | 152.00 BGN |
| 3+ | 144.00 BGN |
| 5+ | 138.00 BGN |
| 10+ | 132.30 BGN |
| view more | |
Time Delay Relay INT0010, 230VAC
6 programmable functions 3 time intervals: 0-99 seconds, 0-99 minutes, and 0-99 hours Power supply: 230 VAC Contacts rating: 7 A/250VAC Dimensions: 85x58x70
685.17 KB
INTIEL
INT0010
4
pc
| 1+ | 155.00 BGN |
| 3+ | 147.00 BGN |
| 5+ | 140.00 BGN |
| 10+ | 134.80 BGN |
| view more | |
Protection - high/low voltage and electric shock
It protects single-phase consumers from increased or decreased voltage in the supply network, as well as from current shocks /short-term loss of network
488.95 KB
INTIEL
3
pc
| 1+ | 155.00 BGN |
| 2+ | 147.00 BGN |
| 3+ | 140.00 BGN |
| 5+ | 134.60 BGN |
| view more | |
Differential Thermostat DT-3.1
The Electronic Differential Thermostat is designed to control the circulation pump and the electrical heating element in relation to the temperature difference between the solar panel and the water heater of the solar panel installation. Power supply: 230V/50Hz Precision class:
677.48 KB
INTIEL
DT-3.1
3
pc
| 1+ | 167.00 BGN |
| 2+ | 159.00 BGN |
| 3+ | 152.00 BGN |
| 5+ | 145.50 BGN |
| view more | |
Differential Thermostat DT-3.1.1
Programmable Differential Thermostat DT-3.1.1 is used for domestic hot water preparation in water heaters, where the heating energy is provided in combined way, by solar panels (fireplace) and electrical heating elements. It is designed to control the circulation pump operation, installed in the water circuit between the solar panels (fireplace) and the water heater serpentine, thus regulating the heat exchanging between them. Power supply: 230V/50~60Hz Temperature sensors: Pt1000 (-50° ~
591.97 KB
INTIEL
DT-3.1.1
5
pc
| 1+ | 187.00 BGN |
| 2+ | 178.00 BGN |
| 3+ | 170.00 BGN |
| 5+ | 163.00 BGN |
| view more | |
Thermostat TR-6.1.1, 250VAC/7A, -30°С/300°С with Pt1000
TR-6.1.1 is designed for an implementation in heating systems, etc., where the temperature is to be kept within certain range. The device monitors the temperature measured by temperature sensor Pt1000, and depending on the difference between the set and actual temperature controls connected to the consumer. Power supply: ~230V/50Hz Nominal commutative current: 7А/~250V Switches: one, switching Analogue autput: 0 -10V/20mA Hysteresis: 1° – 40°С Sensor: Pt1000 (-50° до +250°C) Sensor current: 0.833 mA Measurement range: (-35°C)-(+350°C) Reglation range: (-30°C)-(+300°С) Indication: 4 sectional, digital Measurement unit: 1°С Humidity: 0 - 80% Protection: IP
236.2 KB
INTIEL
TR-6.1.1
4
pc
| 1+ | 212.00 BGN |
| 2+ | 201.00 BGN |
| 3+ | 192.00 BGN |
| 5+ | 184.00 BGN |
| view more | |
Thermostat TR-4.1.1, 250VAC/7A, -30°С/300°С with Pt1000
The Electronic Temperature Regulator TR-4.1.1 is designed to keep the assigned temperature level in chambers between (-30 °C) and (+300 °C). Power supply:
204.69 KB
INTIEL
TR-4.1.1
2
pc
| 1+ | 216.00 BGN |
| 2+ | 205.00 BGN |
| 3+ | 196.00 BGN |
| 5+ | 187.60 BGN |
| view more | |
Thermostat TR-6.3, 250VAC/7A, 25°С/50°С with Pt1000
The device is designed for operation in heating systems. Power supply: 230VAC/50Hz Current: 7A/250VAC Temperature sensor: Pt1000 Hysteresis: 0.1-50°C Measurement range: 25-50°C Regulation range: 25.2-49.9°С Time range: 0-600 sec. Humidity:
211.85 KB
INTIEL
TR-6.3
2
pc
| 1+ | 216.00 BGN |
| 2+ | 205.00 BGN |
| 3+ | 196.00 BGN |
| 5+ | 187.60 BGN |
| view more | |
Thermostat TR-6.3, 250VAC/7A, 0°С/250°С with Pt1000
The device is designed for operation in heating systems in a temperature range of 0°-250°C. It is especially suitable for systems where an output “dosing” is required when the desired temperature is reached or as PWM regulator with adjustable periods for operation impulse and pause and as ON-OFF regulator with adjustable hysteresis. Equipped with one temperature sensor Pt-1000 (-50° up to +250°C) Power supply of ~230V/50Hz Nominal current of 1А/~250V One contact – triak Hysteresis: 1-50°С Measurement range from 0°up to +250°C Regulation range from 1°up to +249°С Time range (Treg): from 0 up to 600 sec. Operation impulse: 0-(Treg) Pause: 0-20sec. Humidity:0-80% Protection:
490.05 KB
INTIEL
TR-6.3 / 0-250C
1
pc
| 1+ | 216.00 BGN |
| 2+ | 205.00 BGN |
| 3+ | 196.00 BGN |
| 5+ | 187.60 BGN |
| view more | |
615.26 KB
INTIEL
INT0129-2
2
pc
| 1+ | 223.00 BGN |
| 2+ | 212.00 BGN |
| 3+ | 202.00 BGN |
| 5+ | 194.00 BGN |
| view more | |
Regulator for fans RO-1
Application: The device is designed to provide a smooth regulation of the capacity with single phase active- inductive consumers (privately – asynchronous motors) within fixed levels. The device can be controlled manually or automatically by means of an analogue signal of 0-10 V. It provides a smooth start-up of the fan and an absence of a start-up current. Technical data: Nominal consumer output of 3.5kW. Nominal power supply ~220V/380V. Provides a protection against a wrong supply phase sequence with an indication. Opportunity for fixing of a lower and upper revolution level of the regulation range. Input of a protective thermo-contact of the motor with an indication Opportunity for a manual or automatic control by outer signal 0-10V Motor smooth
204.03 KB
INTIEL
INT0057-1
0
pc
| 1+ | 261.00 BGN |
Thermostat TR-6.2.1, dual-channel, 250VAC/7A, 0°С/250°С with Pt1000
The controller is designed for installation in systems and equipment that are required to maintain the temperature within certain limits. Power supply: 230V/50Hz Two-Channel relay thermoregulator with two inputs for sensor type: Pt1000 and two independent relay outputs Equipped with a three sectional digital display, showing the assigned and present temperature levels. Regulate the temperature in the range between 0°C~250° Hysteresis range of 1° to 40°C Changing modes: heating / cooling Precision of the regulation
260.76 KB
INTIEL
TR-6.2.1
1
pc
| 1+ | 264.00 BGN |
| 2+ | 250.00 BGN |
| 3+ | 239.00 BGN |
| 5+ | 228.80 BGN |
| view more | |
Differential Thermostat DT-3.2.1
The solar controller DT3.2.1 is integrated into domestic hot water systems in boilers, combined with solar panels (fireplaces) and electric heaters. It is designed to monitor the differential temperature and to control the operation of a circulation pump mounted in the water circuit between the panels (fireplace, boiler) and the boiler coil. This regulates the heat exchange between them, helping to make the system more
1.05 MB
INTIEL
INT0180
0
pc
| 1+ | 289.00 BGN |
Differential Thermostat DT-3.2.2
The solar controller is built into household preparation systems hot water with water heaters combined with solar panels (fireplaces)and electric heaters. It is intended to monitor differential temperature and yes controls the operation of a circulation pump (CP) installed in the water circuit between the panels (fireplace, boiler) and the coil of the water heater. Thus the heat exchange between them is regulated, helping the efficient using the
1.09 MB
INTIEL
INT0184
2
pc
| 1+ | 292.00 BGN |
| 2+ | 277.00 BGN |
| 3+ | 265.00 BGN |
| 5+ | 254.00 BGN |
| view more | |
Differential Thermostat DT-3.3
Differential Thermostat DT-3.3 is used for a domestic hot water preparation, where the heating of the water tanks is provided in combined way, by solar panels and electrical heating elements. It is designed to control the operation of one or two circulation pumps, installed in the water circuit between the solar panels and water heater serpentine, thus regulating the heat exchanging between them. Control the domestic hot water preparation in solar/heating installations equipped with one or two water tanks. Opportunity for a priority heating of the first water tank. Equipped with three temperature sensors Pt1000 (-50° up to
785.18 KB
INTIEL
INT0122
0
pc
| 1+ | 321.00 BGN |
Heating circuits controller INT0129
The device is designed to control motor actuators of mixed valves, in accordance with the water temperature directed to the heating system. It can be used also to keep the temperature in buffers or water tanks heated by a boiler by means of a mixed valve. Power supply: 230V/50Hz Temperature sensors: Pt1000 (-50°С ~ +250°С) Room thermostat input: 0~10V,(4~20mA), contact Two way actuator output: 220V/50W ; ~24V/2.5W Proportional actuator output: 24V/2.5W Circulation pump output switching contact: 220V/3A Control signal 0~10V/max.20mA Measurement range: -30°С ~ +130°С Unit of measurement: 1°С Humidity: up to 80% Protection:
714.68 KB
INTIEL
INT0129
1
pc
| 1+ | 348.00 BGN |
| 2+ | 330.00 BGN |
| 3+ | 316.00 BGN |
| 5+ | 303.00 BGN |
| view more | |
Regulator for fans RO-3
Application: The device is designed to provide a smooth regulation of the capacity with three phase active- inductive consumers (privately – asynchronous motors) within fixed levels. The device can be controlled manually or automatically by means of an analogue signal of 0-10 V. It provides a smooth start-up of the fan and an absence of a start-up current. Technical data: Nominal consumer output of 3.5kW. Nominal power supply ~220V/380V. Provides a protection against a wrong supply phase sequence with an indication. Opportunity for fixing of a lower and upper revolution level of the regulation range. Input of a protective thermo-contact of the motor with an indication Opportunity for a manual or automatic control by outer signal 0-10V Motor smooth
207.13 KB
INTIEL
INT0057-3
0
pc
| 1+ | 364.00 BGN |
Thermostat PVBoiler Rev.02
The device is designed to control the heating of water heaters, buffer vessels and other powered by photovoltaic panels. The controller monitors the following parameters: – the current and voltage of the photovoltaic panel and measures the instantaneous power consumption; – the temperature in the water tank by means of an external temperature sensor Pt-1000. Via “MPPT” mode monitors the point of maximum power from the panel according to the momentary sunlight. In this way, more efficient use of the panel is achieved in low
599.34 KB
INTIEL
INT0176A
0
pc
| 1+ | 365.00 BGN |
Differential Thermostat DT-3.4
Differential thermostat is integrated in systems for preparing domestic hot water into boilers, heated by combination by boiler, solar panels and electric heaters. Designed to manage the work of two circulation pumps installed in: – Water circuit between the panels and serpentine the water tank; – Water circuit between the boiler and the second serpentine of the water tank. In this way regulate heat exchange therebetween. It is possible to include a third pump to regulate the heat exchange between the solar panels and a second tank (buffer tank or pool). Equipped with four temperature sensors Pt1000 (-50 ° to +200 °
892.68 KB
INTIEL
INT0144
0
pc
| 1+ | 394.00 BGN |
Thermostat PVBoiler Rev.03
The device is designed to control the combined heating of boilers having two independent heaters powered by photovoltaic panels and mains
620.15 KB
INTIEL
INT0176E
1
pc
| 1+ | 590.00 BGN |
| 2+ | 561.00 BGN |
| 3+ | 537.00 BGN |
| 5+ | 516.00 BGN |
| view more | |
0700 18 880
Copyright 2004-2024, Panda III Co., Ltd. All rights reserverd.